-
Price:
$927,500 USD -
Location:
Fargo, North Dakota - (800) 437-2924
Interested in this machine? Send us a message
PriceWatch
Subscribe to be notified of price changes on this item.
2026 FABTEC Crusher - Jaw 3042R
Fields with asterisks * are required.
Print This Page
Description
REVERSE PULL JAW PLANT
Inventory ID
E00073927
Serial
PC-30-42-453-26
Machine Location
Details
- Inventory ID: E00073927
- Status: On Yard
- Make: FABTEC
- Model: 3042R
- Year: 2026
- Serial#: PC-30-42-453-26
Notes
- FAB TEC PORTABLE SUPERIOR 30 X 42 JAW PLANT WITH 54" X 51- UNDER JAW CONVEYOR
AND 54" X 20- VGF BUILT IN REVERSE FASHION: - 3 AXLE CARRIER 24" 68# WF BEAMS:
- HUTCH EQUALIZING 9700 SUSPENSION.
- 22 500# STANDARD FORGE AXLES 10- TREAD.
- 11:00R X 24.5 TIRES.
- 4 GROUND SUPPORT STANDS WITH JACKING LEGS.
- FRONT HEAVY DUTY FORWARD FOLDING LEGS.
- K BRACING ON KING PIN CROSSMEMBER AND CROSSMEMBER UNDER VGF.
- AIR BRAKES LED BRAKE LIGHTS LED MARKER LIGHTS LED STROBE LIGHT REFLECTIVE
TAPE AND MUD FLAPS. - SUPERIOR 30 X 42 JAW.
- 54" X 20- SUPERIOR VIBRATING GRIZZLY FEEDER TOSHIBA 40 HP 1800 TEFC.
- HEAVY DUTY JAW MOUNTING FOR SIDE MOUNT JAW.
- AR LINED JAW DISCHARGE HOPPER WITH ADJUSTABLE WIPERS.
- 9- X 21- ~ 3/4" PLATE JAW VGF FEED HOPPER:
- 14" WF SUPPORT BEAMS UNDER HOPPER WITH DIAGONAL BRACES.
1/2" AR LINED VGF HOPPER:
- 30" UP FROM BOTTOM.
- 10- FORWARD.
- PLUG WELDED.
›¼½" AR LINERS ON BOTTOM VERTICALS OF HOPPER:
- PLUG WELDED.
- FULL LENGTH OF VERTICALS. - REMOVABLE 2 PLY RUBBER CURTAINS WITH CHANNEL AND FLAT BAR FRAME ON BOTH SIDES OF
VGF:
- REMOVABLE.
- 1/2" X 6" FLAT BAR HANGERS.
- 6" FLAT BAR WEIGHTS WITH SIDE CLAMPS. - SHEET IN TOP OF ›¼¾- HOPPER PORTION WITH REMOVABLE 2 PLY RUBBER CURTAINS ON BOTH
SIDES:
- REMOVES WITH HOPPER ONLY.
- 1/2" X 4" FLAT BAR HANGERS.
- 4" FLAT BAR WEIGHTS WITH SIDE CLAMPS. - 3/8" PL BY PASS CHUTE UNDER GRIZZLY AREA TO UNDER JAW CONVEYOR WITH ADDED ROCK
CLEARANCE PROVISION FOR REJECT CONVEYOR.
- UHMW LINED ~VS~ AR LINED. - OBSERVATION STAND OVER JAW WITH DIAMOND PLATE FLOOR AND 42" HAND RAILS WITH
ACCESS LADDERS MAINTENANCE PLATFORM ON LOWER DECK.
- FOLDING HANDRAILS FOR EASE OF TRANSPORT PREP AND SETUP. - SELF CLOSING SAFETY GATE AT LADDER OPENING.
- EXTRA HEAVY-DUTY FOLD-DOWN LEGS ON FRONT OF CARRIER. - 54" X 51- UNDER JAW CONVEYOR 30HP NORD RIGHT ANGLE DRIVE.
- LAGGED CROWN HEAD PULLEY SELF-CLEANING WING TAIL PULLEY.
- IMPACT SLIDER BED UNDER JAW AREA THEN 36" SPACING ON CEMA C.
- TEAR RESISTANT 3 PLY BELT WITH VULCANIZED SPLICE
- DODGE SCM BEARINGS AND 2 15/16" ALLOY SHAFTS.
- FAB TEC HEAVY DUTY TAKE-UPS.
- INSPECTION/CLEAN-OUT DOOR IN BACK OF HOPPER.
- ORANGE GUM RUBBER FLASHING
- RUBBER DISC RETURNS
- SUPERIOR XTERRA CLICK WIPER - SAFETY GUARDS SAND BLASTED CHASSIS RUST INHIBITOR PRIMER AND TWO FINISH COATS
INCLUDED. - (6) LEG FAB TEC 70K RUN-ON SYSTEM:
- 18" STROKE CYLINDERS 70 000 LB. CAPACITY (AT 2500 PSI) WITH SAFETY-LOK
CIRCUIT.
- (1) SPOOL VALVE~ NUMBER OF BANKS TO MATCH LEG QUANTITY.
- CYLINDER MOUNTING PLATES & HARDWARE.
- MOUNTED PLATES TO BE PARALLEL ON CHASSIS RAIL.
- HEAVY DUTY FOOT PADS. - SELF CONTAINED HONDA 8 HP HYD. POWER PACKAGE ~VS~ HPX 200 12V:
- ELECTRIC START.
- 12 GALLON HYDRAULIC RESERVOIR WITH FILTER PROTECTION.
- 2 1/2 GPM PUMP. - HYDRAULIC RAISE AND LOWER OF UNDER JAW CONVEYOR:
- 12 VOLT SYSTEM - TOOL BOX MOUNTED ON CHASSIS.
- GUARDING - WE DO NOT WARRANT THAT MANUFACTURERS- GUARDING WILL MEET ALL LOCAL
CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE GUARDING CHECKED BY A
LOCAL INSPECTOR PRIOR TO STARTUP OF EQUIPMENT OPERATIONS CORRECTIVE ACTIONS
AND ASSOCIATED EXPENSE ARE THE RESPONSIBILITY OF THE END USER.